Moxa MGate 5216 Series Gateway
2-port serial/Modbus-to-EtherCAT gateways




- Protocol Conversion from Modbus RTU/ASCII and Proprietary Serial to EtherCAT
- Supports Modbus RTU/ASCII Client and EtherCAT Slave
- 512-byte Data Input and Output Capacity
- MicroPython Support for Custom Serial Protocols
- Redundant Dual DC Power Inputs and Relay Output
- Industrial-grade Security Compliance (IEC 62443-4-2)
The Moxa MGate 5216 Series Gateway is a robust industrial solution designed to enable seamless communication between Modbus RTU/ASCII, proprietary serial devices, and EtherCAT systems. Built with a rugged metal housing and optimized for easy configuration, it features web console support with HTTPS encryption and advanced troubleshooting tools for effective maintenance.
This gateway is particularly suited for automation applications, with built-in diagnostic tools and industrial certifications that meet high standards for EMC, safety, and reliability.
Specifications
Ethernet Interface | |
10/100BaseT(X) Ports (RJ45 connector) | 2, Auto MDI/MDI-X connection |
Magnetic Isolation Protection | 1.5 kV (built-in) |
Ethernet Software Features | |
Industrial Protocols | EtherCAT Slave |
Configuration Options | Web Console (HTTP/HTTPS), Device Search Utility (DSU) |
Management | ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, UDP |
MIB | MIB-II |
Time Management | NTP Client |
Serial Interface | |
No. of Ports | 2 |
Connector | DB9 male |
Console Port | RS-232 (TxD, RxD, GND), 10-pin RJ45 (115200, n, 8, 1) |
Serial Standards | RS-232/422/485 |
Baudrate | 50 bps to 921.6 kbps |
Data Bits | 7, 8 |
Parity | None, Even, Odd, Space, Mark |
Stop Bits | 1, 2 |
Flow Control | RTS Toggle (RS-232 only), RTS/CTS |
RS-485 Data Direction Control | Automatic Data Direction Control (ADDC) |
Pull High/Low Resistor for RS-485 | 1 kilo-ohm, 150 kilo-ohms |
Terminator for RS-485 | 120 ohms |
Isolation | 2 kV (built-in) |
Serial Software Features | |
Configuration Options | Serial Console |
Industrial Protocols | Modbus RTU/ASCII Client |
Functions Supported | 1, 2, 3, 4, 5, 6, 15, 16, 23 |
Max. No. of Commands | 128 per serial port |
Total Input Data Size | 512 bytes |
Total Output Data Size | 512 bytes |
MicroPython | |
Version | 1.20.0 |
Functions Supported | Input, Output, Input/Output |
Max. No. of Commands | 64 per serial port |
Total Input Data Size | 512 bytes |
Total Output Data Size | 512 bytes |
EtherCAT | |
Mode | Slave |
Baudrate | Full duplex 100 Mbps |
FMMU | 3 |
Sync Manager | 4 |
Memory | |
microSD Slot | Up to 32 GB (SD 2.0 compatible) |
Power Parameters | |
Input Voltage | 12 to 48 VDC |
Input Current | 416 mA (max) |
Power Connector | Spring-type Euroblock terminal |
Physical Characteristics | |
Housing | Metal |
IP Rating | IP30 |
Dimensions (without ears) | 45.8 x 105 x 134 mm (1.8 x 4.13 x 5.28 in) |
Weight | 589 g (1.30 lb) |
Environmental Limits | |
Operating Temperature | 0 to 60°C (32 to 140°F) |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | |
EMC | EN 61000-6-2/-6-4 |
EMI | CISPR 32, FCC Part 15B Class A |
EMS | IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV; IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m; IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV; IEC 61000-4-5 Surge: Power: 2 kV, Signal: 2 kV; IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m; IEC 61000-4-8 PFMF |
Safety | EN 60950-1, UL 61010-2-201 |
Freefall | IEC 60068-2-32 |
Shock | IEC 60068-2-27 |
Vibration | IEC 60068-2-6, IEC 60068-2-64 |
MTBF | |
Time | 2,305,846 hrs |
Standards | Telcordia SR332 |
Warranty | |
Warranty Period | 5 years |
Package Contents | |
Device | 1 x MGate 5216 Series gateway |
Documentation | 1 x quick installation guide, 1 x warranty card |
