Advantech ICR-3831B

ICR-3831 cellular LTE Cat. 4 router & and the gateway is designed and EN 50155 certified for rolling stock applications such as railways or trams.

LTE Router provides secure Internet connectivity for devices equipped serial interface and LANs via the cellular networks. With upload speeds of up to 50 Mbps and download speeds of up to 150 Mbps, ICR-3800 provides ample bandwidth, even for applications that require video and fast Internet access.

ICR-3831 is equipped with an extremely powerful Cortex A8 CPU at 1GHz, 256 MB flash memory, 512 MB RAM and 128kB M-RAM, providing full support for LTE (Long Term Evolution) speeds and railway applications.

A secure Web interface allows users to configure and manage ICR-3831 cellular LTE router from remote locations. The router can also upgrade its configuration and firmware from the operator’s central server, allowing for simultaneous mass reconfiguration of every router on the network. Users may insert Linux scripts and can create multiple configurations for the same router and switch from one configuration to another at any time.

Standard configuration includes 2 Ethernet ports with 2 independent LANs/ IP addresses and also includes 1 USB host port, 1 microSD card holder, 2 SIM card holders for automatic failover to an alternate service provider, 2 binary inputs(I/O), 2 binary outputs (I/O), 1 RS232 port and onboard GPS. All connectors are M12 type. The router has industrial grade operating temperature range is -40 to +70 °C .

ICR-3831 supports real time data encryption and the creation of VPN tunnels using IPsec, OpenVPN and L2TP. It supports DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS, and numerous other functions.

We also support two monitoring platforms. Both platforms are based on a cloud solution. First one is R-SeeNet (using SNMP traps) and the new, lower cost monitoring and management platform called WebAccess/DMP.

SPECIFICATIONS

PORTS, LED, ANTENNAS


Ethernet
2× LAN port 10/100 Base-TX, 4-pin D-coded M12

SIM
2 Mini SIMs (2FF)

LED indicators
IN0, IN1, OUT0, OUT1, SIM, WAN, DAT, PoE, USR, Power

2× ANT
TNC-F connectors - MAIN + DIV

1× GPS
TNC-F connector - support active/passive antennas

1× RS232
8-pin A-coded M12 (TXD, RXD, DCD, DTR, DSR, RTS, CTS and GND)

I/O
2× opto-coupled digital Inputs (max. 60 V DC, max. 7 mA)
2× opto-coupled digital Outputs (max. 60 V AC/DC, max. 300 mA), 8-pin A-coded M12

USB
2.0 USB host, 5 pin A-coded M12

SD
1× MicroSD, SDHC up to 32 GB, SDXC from 32 GB up to 64 GB



GNNS SPECIFICATIONS


Antenna
50 Ohms – active/passive

Protocols
NMEA 0183 v3.1

Frequency
1575.42MHz Typical

Sensitivity
-162 dBm

Tracking Sensitivity
(Open sky)

Active antenna or LNA: -159 dBm Passive antenna: -156 dBm



CELLULAR MODULE PARAMETERS


LTE parameters
FDD-LTE - 2100 (B1) / 1800 (B3) / 2600 (B7) / 900 (B8) / 800 (B20)

WCDMA parameters
WCDMA - 2100 (B1) / 900 (B8)

GPRS/EDGE parameters
GSM/EDGE - 1800 (B3) / 900 (B8)



NETWORKING


Network and Routing
DHCP Server, NAT/PAT, VRRP, Dynamic DNS client, DNS proxy, VLAN, QoS, DMVPN, NTP Client/ Server, IGMP, BGP, OSPF, RIP, SMTP, SMTPS, SNMP v1/ v2c/ v3, Backup Routers, PPP, PPPoE, SSL, Port Forwarding, Host Port Routing, Ethernet Bridging

Security
HTTPS, SSH, VPN tunnels, SFTP, DMZ, Firewall (IP Filtering, MAC address filtering, Inbound and outbound Port filtering)

VPN Tunnelling
Open VPN client and server and P2P, L2TP, PPTP, GRE, EasyVPN, IPSec with IKEv1 and IKEv2

Configuration
Web server, SSH, Four configuration switchable profiles, Automatic configuration update from server, Backup configuration, Restore configuration

Firmware Management
Automatic firmware update from server, Locally via LAN or remotely OTA (HTTP, HTTPS), Over-the-Air cellular module update

Diagnostic
One CLICK report - current configuration / factory identification / system log / kernel log / reboot log / routing table, Remote diagnostics possible via SSH

Status
Network Status, DHCP Status, IPSec Status, Statistics history for last 60days

Log
System Log, Reboot Log, Kernel Log

Controlling and Diagnostic
SMS, SNMP v1/v2c/v3, Statuses

Event Engine - Supported Events
StartUp script & Up/Down script (Bash, Python), Digital Input, Network Parameters, Data Usage, Timer, Power, Device Temperature. Report Types: SMS, email, SNMP Trap

Other
Support of IPv6, Dual Stack

Applications Development
Open Linux, Python, BASH, C/C++, Node-RED



POWER, CONSUMPTION, ENVIRONMENTAL, IP COVER


Power Supply
12 – 36V DC (5-pin A-coded M12)

*Optional Power over Ethernet (PoE)
PoE+ Powered Device
(IEEE 802.3at, Type 2, Class 4)

Power Consumption
4 to 11W

Temperature Range
– Operating -40 to +70 °C

Humidity – Operating / Storage (noncondensing)
0 to 95 % / 0 to 95 %

Cold Start
-40 °C

Operating Altitude
2000 m / 70 kPa

Enclosure Rating
IP40



MECHANICAL


Metal case, Wall mount kit
Metal

Enclosure Dimensions
203x59x113.1mm

Weight
855g



STANDARDS AND REGULATIONS - ICR3800


Radio
EN 301 511, EN 301 908-1, EN 301 908-2, EN 301 908-13, EN 303 413

EMC
EN 301 489-1, EN 301 489-19, EN 301 489-52, EN 61000-4-2
EN 61000-6-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5,
EN 61000-4-6, EN 50121-3-2

Safety
EN 60950-1

Climatic
EN 60068-2-2, EN 60068-2-1, EN 60068-2-14,
EN 60068-2-14, EN 60068-2-30

Mechanical
EN 61373, EN 60529

Transportation
EN 50155, EN 45545-1

National
CE

Environmental
REACH, RoHS3 and WEEE compliant