Perle TC EXTENDER 2001 ETH-2S
Long Range Ethernet Extender
- Transmit Ethernet data up to 20km
- Automatic SHDSL data rate detection
- Network transparent (no IP configuration required)
- Protocol transparent
Der TC EXTENDER erweitert die Ethernet-Datenübertragung transparent auf bis zu 20 km über eine Twisted Pair- (CAT5/6/7), Koaxial- oder eine beliebige bereits verlegte Kupferleitung, die zuvor in Alarmschaltkreisen, E1/T1-Schaltkreisen, RS-232-, RS-422-, RS-485-, Überwachungskamera- und CATV-Anwendungen verwendet wurde.
Langstrecken-Ethernet Übertragung über Kupfer
SHDSL ist die bevorzugte Technologie für die Übertragung digitaler Daten über lange Kupferkabel eines Netzwerks hinweg. Obwohl die Leistung von den Eigenschaften des verwendeten Kabels abhängt, ist die Reichweite von SHDSL viel größer als bei anderen derzeit verfügbaren DSL-Technologien. Außerdem ist die Upload- und Download-Bandbreite symmetrisch und liefert Datengeschwindigkeiten von bis zu 15,3 Mb/s über 2-polige und 30 Mb/s über 4-polige Kupferdrähte.
Der TC EXTENDER ist protokolltransparent. Mit zwei SHDSL-Ports können Sie Punkt-zu-Punkt, lineare oder Ringnetzwerkstrukturen einfach mit Reichweiten von bis zu 20 km einrichten. Diese einfachen und effektiven Ethernet Extender eignen sich perfekt für industrielle Umgebungen, Geschäftsgebäude, Wohneinheiten, Krankenhausumgebungen, Vernetzung eines dezentralen Büros oder als private Hauptachse zu einem Geschäfts-LAN... überall, wo Sie Ethernet-Kommunikationsverbindungen zwischen separaten LANs oder LAN-Geräten (d. h. PCs, Digitalsensoren, VoIP-Telefone, WiFi-APs, IP-Kameras u.v.m.) benötigen.
Zwei durch Software konfigurierbare Digitalausgänge sind zur Erzeugung eines externen Gerätealarms verfügbar.
Für die Langstrecken-Ethernet-Datenübertragung mit “plug and play” ist der TC EXTENDER 2001 ETH-2S die ideale Lösung.
Langstrecken-Ethernet-Extender Features
- Robuste Modulationsmethode (SHDSL)
- Zukunftssicher (IPv4- und IPv6-kompatibel)
- Automatische Erkennung des Netzwerkkabeltyps (auto MDI(X))
- Automatische Netzwerkdatengeschwindigkeitserkennung (10/100 Mb/s)
- Einfache Einrichtung, Plug-and-Play
- Zwei Alarm- und Signalausgänge
TC EXTENDER 2001 ETH-2S Technical Specifications
Serial interface | |
---|---|
Interface 1 | Ethernet interface, 10/100Base-T(X) in acc. with IEEE 802.3u |
Interface | Ethernet |
Connection method | RJ45 socket, shielded |
1 port 10/100Base-T(X), auto negotiation | |
Transmission length | < 100 m (shielded twisted pair) |
Protocols supported | Protocol-transparent for TCP/IP, IPv4, and IPv6 |
Serial transmission speed | 10/100 Mbps, auto negotiation |
Interface 2 | SHDSL interface according to ITU-T G.991.2.bis |
No. of channels | 2 (2-wire operation) |
Connection method | 2 x 2-pos. COMBICON plug-in screw terminal blocks |
Transmission length | < 20 km (Depending on data rate and cable cross section) |
Conductor cross section solid min. | 0.2 mm² |
Conductor cross section solid max. | 2.5 mm² |
Conductor cross section flexible min. | 0.2 mm² |
Conductor cross section flexible max. | 2.5 mm² |
Conductor cross section AWG min. | 24 |
Conductor cross section AWG max. | 14 |
Serial transmission speed | 4-wire operation: 64 kbps ... 30 Mbps |
2-wire operation: 32 kbps ... 15.3 Mbps | |
Interface 3 | USB 2.0 |
Connection method | Mini-USB type B, 5-pos. |
Transmission length | < 5 m (only for configuration and diagnostics) |
Digital outputs | |
Output name | Digital output |
Number of outputs | 2 |
Voltage output signal | depending on the operating voltage |
Current output signal | ≤ 150 mA (Short-circuit-proof) |
Connection method | 2 x 2-pos. COMBICON plug-in screw terminal blocks |
Behavior of the outputs | Deactivated for device supply via DIN rail connector |
Function | |
Management | Plug and Play, diagnostics via PSI-CONF software or web-based management (only with managed Ethernet extenders) |
Status and diagnostic indicators | LEDs: US (supply voltage), ACT/LINK (Ethernet data traffic), ERR (errors) |
2x LINK / 2x STAT (DSL data traffic port A and port B), DIAG (diagnostic messages) | |
Ambient Conditions | |
Ambient temperature (operation) | -20 °C ... 60 °C (Freestanding (40 mm spacing to the right and left), no supply of other modules via the device) |
-20 °C ... 55 °C (Mounted in rows with zero spacing and low power dissipation of aligned modules) | |
-20 °C ... 50 °C (Mounted in rows with zero spacing) | |
-20 °C ... 45 °C (Mounted in rows with zero spacing and supply of other modules via the device) | |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Permissible humidity (operation) | 10 % ... 95 % (non-condensing) |
Permissible humidity (storage/transport) | 10 % ... 95 % (non-condensing) |
Altitude | 5000 m (For restrictions see manufacturer´s declaration) |
Degree of protection | IP20 |
General | |
Electrical isolation | VCC // Ethernet // DSL (A) // DSL (B) // FE |
Test voltage data interface/power supply | 1.5 kVrms (50 Hz, 1 min.) |
Standards/regulations | EN 50121-4 |
Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Net weight | 258.7 g |
Housing material | PA 6.6-FR |
Color | gray |
MTTF | 711 Years (SN 29500 standard, temperature 25°C, operating cycle 21 % (5 days a week, 8 hours a day)) |
308 Years (SN 29500 standard, temperature 40 °C, operating cycle 34.25 % (5 days a week, 12 hours a day)) | |
125 Years (SN 29500 standard, temperature 40°C, operating cycle 100 % (7 days a week, 24 hours a day)) | |
Conformance | CE-compliant |
Power supply | |
Nominal supply voltage | 24 V DC ±5 % (as an alternative or redundant, via backplane bus contact and system current supply) |
5 V DC (configuration only, via mini-USB type B) | |
Supply voltage range | 18 V DC ... 30 V DC |
Typical current consumption | < 180 mA (24 V DC) |
Connection method | COMBICON plug-in screw terminal block |
Dimensions | |
Width | 35 mm |
Height | 99 mm |
Depth | 114.5 mm |
Environmental Product Compliance | |
China RoHS | Environmentally Friendly Use Period = 50 |
Reach and RoHS Compliant | Reach and RoHS Compliant |
Standards and Regulations | |
Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
Vibration resistance | In acc. with EN 60068-2-6/IEC 60068-2-6 Result: 5g, 10...150 Hz, 2.5 h, in XYZ direction |
Shock | In acc. with EN 60068-2-27/IEC 60068-2-27 Result: 15g |
EMC Immunity | EN 61000-4-2: Contact discharge ± 6 kV, Indirect discharge ± 6 kV EN 61000-4-3: Frequency range 80 MHz ... 3 GHz EN 61000-4-4: Criterion B EN 61000-4-5: Signal ± 1 kV (asymmetrical, shielded Ethernet cable) EN 55011 EN 61000-4-6: Frequency range 0.15 MHz ... 80 MHz EN 50121-4 |
Conformance | CE-compliant |
ATEX | II 3 G Ex nA IIC T4 Gc X |
UL, USA/Canada | cULus listed UL 508 |
Approvals | |
UL Listed cUL Listed ATEX cULus Listed | |
Commercial data | |
Packing unit | 1 |
Weight per piece | 0.0 g |
Country of origin | Germany |
Ordering Information
- TC EXTENDER 2001 ETH-2S
- Long Range Ethernet Extender. 1 port 10/100Base-TX (RJ-45) . SHDSL via 4-pin terminal blocks. Links up to 20km – 24VDC, 18W UK wall power adapter with tinned leads included UK
TC EXTENDER 2001 ETH-2S
- Long Range Ethernet Extender. 1 port 10/100Base-TX (RJ-45) . SHDSL via 4-pin terminal blocks. Links up to 20km – 24VDC, 18W EU wall power adapter with tinned leads included EU