TERZ NITE-XS Fast Ethernet Series
Unmanaged Industrial Ethernet Switches M12 IP65/67
- Flexible use with 24 VAC/VDC
- IP65/67 metal housing
- Ultra-compact, ruggedized design
- Inrush current limitation
- Temperature range -40 to +70°C
- DIN EN 50155 rail compliant
- Polarity protection
- PROFINET suitable
Die weltweit kompaktesten Industrial M12 Switches sind perfekt für den Einsatz in Personenzügen, Bussen, Nutzfahrzeugen und Landmaschinen geeignet. Staubdicht und vor eindringendem Wasser geschützt sparen die TERZ Industrial Ethernet Switches kostbaren Platz im Schaltschrank. Mit hervorragenden elektrischen Eigenschaften (DIN EN 50121-3-2), einer Spannungsfestigkeit von 2,25 kVDC, hoher Schock- und Vibrationsfestigkeit (DIN EN 61373) und Brandschutz nach DIN EN 45545, entsprechen die NITE-XS der DIN EN 50155. Dank des erweiterten Temperaturbereichs und zwei unterschiedlichen Frame Forwarding/Blocking Varianten (LLDP/PTCP) werden alle industriellen Applikationen und PROFINET Anwendungen optimal unterstützt.
General
Switch:
IEEE802.3 Store and Forward; non-blocking wire speed
Auto-Negotiation, Auto-MDI-X, Auto-Polarity:
Yes
Frame size:
2,048 Bytes
MAC table size:
2,000 addresses
Quality of Service:
Yes – 4 priority queues
Energy Efficient Ethernet:
No
Flow Control:
No
PROFINET suitable:
Yes
IEEE802.3 Store and Forward; non-blocking wire speed
Auto-Negotiation, Auto-MDI-X, Auto-Polarity:
Yes
Frame size:
2,048 Bytes
MAC table size:
2,000 addresses
Quality of Service:
Yes – 4 priority queues
Energy Efficient Ethernet:
No
Flow Control:
No
PROFINET suitable:
Yes
Port count (M12) | 4 | 6 | 8 |
MTBF (SN 29500, Mio. h) | 3,431 | 2,791 | 2,353 |
Frame Forwarding (Art.-No.) | xxxxx0 | xxxxx1 |
LLDP, PTCP Delay 01:80:C2:00:00:0E | Forwarding | Blocking |
RSTP BPDU 01:80:C2:00:00:00 | Forwarding | Forwarding |
Power supply / electronics
Nominal voltage:
Vin 24 VAC / 24 VDC
Permitted voltage range:
8 to 28 VAC / 9 to 36 VDC
Connection type:
Vin M12 A-cod. (+ -) | M4 thread drill hole (FE)
Supply circuit:
SELV DIN 60950 (circuit breaker 10 A)
Redundant power supply:
Yes, two full-bridge circuits
Inrush current limiter:
Yes
Input fuse:
Yes, Interrupting rating 50 A @ 125 VAC/VDC
Polarity protection:
Yes
Power failure bridging:
10 ms DIN 50155
PCB Conformal Coating:
Yes
Protection category:
III
Isolation:
2.25 kVDC; Vin ↔ Ethernet Ports | Vin ↔ housing
Vin 24 VAC / 24 VDC
Permitted voltage range:
8 to 28 VAC / 9 to 36 VDC
Connection type:
Vin M12 A-cod. (+ -) | M4 thread drill hole (FE)
Supply circuit:
SELV DIN 60950 (circuit breaker 10 A)
Redundant power supply:
Yes, two full-bridge circuits
Inrush current limiter:
Yes
Input fuse:
Yes, Interrupting rating 50 A @ 125 VAC/VDC
Polarity protection:
Yes
Power failure bridging:
10 ms DIN 50155
PCB Conformal Coating:
Yes
Protection category:
III
Isolation:
2.25 kVDC; Vin ↔ Ethernet Ports | Vin ↔ housing
Port count (M12) | 4 | 6 | 8 |
Power consumption (W) Idle | full load | 0.4 | 0.82 | 0.4 | 1.0 | 0.4 | 1.2 |
Input current (mA) Idle | full load | 16 | 34 | 16 | 42 | 16 | 50 |
Inrush current (A) | 8 | 8 | 8 |
Mechanical properties
Housing material:
Nickel-plated aluminium, stainless steel
Mounting:
M6 hole for wall mounting, round head screw
IP Protection class (operation):
IP65/67
Nickel-plated aluminium, stainless steel
Mounting:
M6 hole for wall mounting, round head screw
IP Protection class (operation):
IP65/67
Port count (M12) | 4 | 6 | 8 |
Width (mm) | 55 | 55 | 55 |
Height (mm) | 93 | 117 | 141 |
Depth (mm) | 29.8 | 29.8 | 29.8 |
Weight (g) | 200 | 250 | 295 |
Ethernet Interfaces
IEEE Standards:
802.3 10BaseT, 802.3u 100BaseT(X)
Isolation:
2.25 kVDC; Ethernet Port ↔ housing | Port ↔ Port
Connection type:
M12 D-coded
Port count | Speed:
4,6,8 Ports | 10/100 Mbit/s
Cable length:
100 m (Twisted Pair, 0.14 mm² - 0.22 mm², Cat 5)
802.3 10BaseT, 802.3u 100BaseT(X)
Isolation:
2.25 kVDC; Ethernet Port ↔ housing | Port ↔ Port
Connection type:
M12 D-coded
Port count | Speed:
4,6,8 Ports | 10/100 Mbit/s
Cable length:
100 m (Twisted Pair, 0.14 mm² - 0.22 mm², Cat 5)
EMC and environmental specifications
Operating temperature:
-40°C to +70°C
Storage temperature:
-40°C to +85°C
Relative humidity (operation):
0%-95% (not condensing)
Relative humidity (storage):
0%-95% (not condensing)
Atmospheric pressure (operation):
2,000 m (795 hPa)
EMC immunity:
DIN EN - 50121-3-2, 61000-6-2, 55024
EMC radiated emission:
DIN EN - 50121-3-2, 61000-6-4, 55032
Mechanical stability:
DIN EN 61373
Fire protection:
DIN EN 45545
-40°C to +70°C
Storage temperature:
-40°C to +85°C
Relative humidity (operation):
0%-95% (not condensing)
Relative humidity (storage):
0%-95% (not condensing)
Atmospheric pressure (operation):
2,000 m (795 hPa)
EMC immunity:
DIN EN - 50121-3-2, 61000-6-2, 55024
EMC radiated emission:
DIN EN - 50121-3-2, 61000-6-4, 55032
Mechanical stability:
DIN EN 61373
Fire protection:
DIN EN 45545
Approvals and certifications
CE, DIN EN 50155, DIN EN 60950-1
Status and diagnostic indicators
LED:
Power | Link/Activity per Port
Power | Link/Activity per Port
ORDERING INFORMATION
Available Modules | ||
Article | Art.-No. | Specification |
NITE-XS4-1100 | 411300 | 4xM12, FE, 24 V |
NITE-XS6-1100 | 411500 | 6xM12, FE, 24 V |
NITE-XS8-1100 | 411600 | 8xM12, FE, 24 V |
NITE-XS4-1101 | 411301 | 4xM12, FE, 24 V, LLDP Blocking |
NITE-XS6-1101 | 411501 | 6xM12, FE, 24 V, LLDP Blocking |
NITE-XS8-1101 | 411601 | 8xM12, FE, 24 V, LLDP Blocking |
NITE-XS Push Pull - Industrial Ethernet Switch with M12 PushPull
Available Modules | ||
Article | Art.-No. | Specification Speed: 10/100 IP class :IP65/67 |
NITE-XS4-1110 | 411310 | 4x M12 D PushPull |
NITE-XS6-1110 | 411510 | 6x M12 D PushPull |
NITE-XS8-1110 | 411610 | 8x M12 D PushPull |
NITE-XS4-1111 | 411311 | 4x M12 D PushPull |
NITE-XS6-1111 | 411511 | 6x M12 D PushPull |
NITE-XS8-1111 | 411611 | 8x M12 D PushPull |
Kunden, die diesen Artikel gesehen haben, sahen auch