MOXA NPort S9450I Series

SPHINX in Europa
AT
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Produktgruppen > Device Server > MOXA NPort S9450I Series

MOXA NPort S9450I Series

4-port rugged device server with managed Ethernet switch

MOXA NPort S9450I Series
5183_12658.png
5183_12091.jpg
5183_12092.jpg
  • EigenschaftenEigenschaften
  • BeschreibungBeschreibung
  • Weitere InformationenWeitere Informationen
  • PDFPDF
  • 4-port RS-232/422/485 serial interface
  • Supports up to 5 managed Ethernet switch ports (fiber available with some models)
  • DNP3 and Modbus protocols supported
  • IEC 61850-3, IEEE 1613 compliant (for power substations)
  • Ethernet redundancy with Turbo Ring/Chain and RSTP/STP supported
  • Real COM/TTY drivers for Windows and Linux
  • Supports IEC 61850 MMS protocol
  • Supports IEC 62443 Level 2
  • -40 to 85°C wide operating temperature
Overview

The NPort S9450I series 4-port RS-232/422/485 device servers, which come with a built-in full-function managed Ethernet switch, are designed specifically for the harsh environmental conditions found in electrical substations. With both fiber and wire Ethernet ports supported, the combination of device server plus Ethernet switch gives users the ability to easily install, manage, and maintain the NPort S9450I itself, as well as attached serial devices.

Electromagnetic Compatibility for Harsh Substation Environments

The NPort S9000 series supports a high level of surge protection to prevent damage from the types of power surges and EMI one finds in electrical substations and industrial automation applications. Combined with a -40 to 85°C operating temperature range and galvanized steel housing, the NPort S9000 is suitable for a wide range of industrial environoments.

Another plus is the NPort S9000’s dual power supplies, which provide both redundancy, as well as a wide range of voltage inputs. The WV models accept a power 24/48 VDC power input (ranging from 18 to 72 VDC), and the HV modesl accept a power input of 88 to 300 VDC and 85 to 264 VAC.

Power SCADA with IEC 61850 MMS for Easy Maintenance

The current trend in power SCADA applications is to control and monitor both IT devices (switches, routers, etc.) and IEDs (sensors, actuators, etc.) with the MMS protocol. Contrast this with the more traditional management approach of using SNMP for IT devices and MMS for IEDs. In fact, SIs may even need to manage a variety of legacy devices that use proprietary communications protocols. The NPort S9000 device servers are the world’s first device servers to integrate MMS into an IT-type device designed specifically for power SCADA applications. The NPort S9000 even supports using MMS to monitor serial communications between the S9000 and the legacy devices.

Supports Modbus/DNP3 Protocol Gateway

The NPort S9000 series provides maximum flexibility for integrating industrial Modbus/DNP3 networks of all types and sizes. The NPort S9000 is designed to integrate Modbus TCP, ASCII, and RTU devices in almost any master/slave combination, including simultaneous serial and Ethernet masters. The NPort S9000 device servers also support protocol conversion between DNP3 serial and DNP3 IP. All models are ruggedly constructed and are DIN-rail mountable.

IEEE 62443 Level 2 Supported for Cybersecurity

The NPort S9000 series supports IEEE 62443 Level 2, and is designed for NERC CIP compliance system development to provide a high level of cybersecurity. Protecting mission-critical networks from cyber attacks is a high-priority for industrial automation applications, which can suffer large losses due to extended network downtime.

Ring Redundancy at the Device Level

Device-level communication networks for industrial automation are very critical since they are used to control and monitor device processes. The reliability of these communications depends on ring redundancy at the device level, which is designed to provide fast network fault detection and reconfiguration to support the most demanding control applications. The NPort S9000 series integrates a full-function NPort device server with an industrial switch to carry serial and Ethernet devices at the same time. In addition, the NPort S9000 can also achieve ring redundancy with standard STP/RSTP and Moxa’s proprietary Turbo Ring or Turbo Chain 2 redundancy protocols. This all-in-one design can be used to optimize and simplify your device network and enhance reliability.

ProdGrafik

General Specifications


    Port Summary

      Serial Ports
      4 RS-232/422/485 ports

      Ethernet Switch Ports
      NPort S9450I all copper models: 5 RJ45 copper ports
      NPort S9450I copper/fiber models: 3 RJ45 copper ports, 2 fiber ports

      Magnetic Isolation Protection
      1.5 kV built in

      Console Ports
      1 (10-pin RJ45 connector)



    Physical Characteristics

      Housing
      Metal

      Weight
      2.54 kg (5.60 lb)

      Dimensions
      80 x 160 x 109 mm (3.15 x 6.30 x 4.29 in)



    Environmental Limits

      Operating Temperature
      -40 to 85°C (-40 to 185°F)

      Storage Temperature
      -40 to 85°C (-40 to 185°F)

      Ambient Relative Humidity
      5 to 95% (non-condensing)



    Power Requirements

      Input Voltage
      WV models: 24/48 VDC (18 to 72 VDC)
      HV models: 110/220 VAC/VDC (88 to 300 VDC, 85 to 264 VAC)

      Input Current
      520 mA @ 24 VDC
      80 mA @ 110 VDC



    Standards and Certifications

      Safety
      UL 508, UL 61010

      EMC
      EN 61000-6-2/61000-6-4

      EMI
      CISPR 22, FCC Part 15B Class A

      EMS
      IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
      IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
      IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
      IEC 61000-4-5 Surge: Power 6 kV; Signal: 4 kV
      IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
      IEC 61000-4-8

      Hazardous Location
      UL/cUL Class I Division 2 Groups A/B/C/D



    Warranty

      Warranty Period
      5 years

      Details
      See www.moxa.com/warranty




Device Server Specifications


    Serial Interface

      Number of Ports
      4

      Serial Standards
      RS-232/422/485

      Connector
      DB9 male

      Serial Line Protection
      2 kV isolation protection

      RS-485 Data Direction Control
      ADDC® (Automatic Data Direction Control)

      Console Port
      Dedicated RS-232 console port (10-pin RJ45)



    Serial Communication Parameters

      Data Bits
      5, 6, 7, 8

      Stop Bits
      1, 1.5, 2

      Parity
      None, Even, Odd, Space, Mark

      Flow Control
      RTS/CTS and XON/XOFF

      Baudrate
      50 bps to 921.6 Kbps



    Serial Signals

      RS-232
      TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

      RS-422
      Tx+, Tx-, Rx+, Rx-, GND

      RS-485-4w
      Tx+, Tx-, Rx+, Rx-, GND

      RS-485-2w
      Data+, Data-, GND

      Digital Input
      2 inputs with the same ground, but electrically isolated from the electronics
      • +13 to +30 V for state "1"
      • -30 to +3 V for state "0"
      • Max. input current: 8 mA



    Software

      Configuration Options
      Command Line Interface (CLI) through Serial/Telnet/SSH, Web Console (HTTP/HTTPS), Windows Utility

      Windows Real COM Drivers
      Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded

      Fixed TTY Drivers
      SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X

      Linux Real TTY Drivers
      Linux 2.4.x, 2.6.x, 3.x

      Operation Modes
      Real COM, TCP Server, TCP Client, UDP, RFC2217, Modbus, DNP3, DNP3 Raw Socket

      Management
      SNMP MIB-II, IEC 61850 MMS



    Reliability

      Alert Tools
      Built-in buzzer and RTC (real-time clock)

      Automatic Reboot Trigger
      Built-in WDT (watchdog timer)



    MTBF (mean time between failures)

      Time
      347,436 hrs

      Standard
      Telcordia (Bellcore) Standard TR/SR




Ethernet Switch Specifications


    Ethernet Interface

      Standards
      IEEE 802.3 for 10BaseT
      IEEE 802.3u for 100BaseT(X) and 100BaseFX
      IEEE 802.3x for Flow Control
      IEEE 802.1D for Spanning Tree Protocol
      IEEE 802.1w for Rapid STP
      IEEE 802.1Q for VLAN Tagging
      IEEE 802.1p for Class of Service
      IEEE 802.1x for Authenti

      Network Protocols
      ICMP, IPv4, TCP, UDP, ARP, Telnet, DNS, HTTP, SMTP, SNTP, IGMPv1/v2, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, GMRP, LACP, RMON

      MIB
      MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9

      Flow Control
      IEEE 802.3x flow control, back pressure flow control interface



    Switch Properties

      Priority Queues
      4

      Max. Number of Available VLANs
      64

      VLAN ID Range
      VID 1 to 4094

      IGMP Groups
      256

      Cybersecurity
      Ready for NERC CIP compliance system development
      • Supports IEC 62443 Level 2
      • Supports port access control list: MAC, 802.1x authentication
      • Supports RADIUS, TACACS+
      • Supports Syslog for system/event



    Optical Fiber Interface

      pictures



    Switch Interface

      RJ45 Ports
      10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection

      Alarm Contact
      2 relay outputs with current carrying capacity of 1A @ 24 VDC




Ordering Information

Available Modules
NPort S9450I-WV-T 4-port RS-232/422/485 rugged device server,
5 10/100M Ethernet ports, 24/48 VDC,
-40 to 85°C operating temperature
NPort S9450I-HV-T 4-port RS-232/422/485 rugged device server,
5 10/100M Ethernet ports, 88-300 VDC or 85-264 VAC,
-40 to 85°C operating temperature
NPort S9450I-2M-SC-WV-T 4-port RS-232/422/485 rugged device server,
3 10/100M Ethernet ports,
2 100M multi-mode fiber ports with SC connectors,
24/48 VDC, -40 to 85°C operating temperature
NPort S9450I-2M-SC-HV-T 4-port RS-232/422/485 rugged device server,
3 10/100M Ethernet ports,
2 100M multi-mode fiber ports with SC connectors,
88-300 VDC or 85-264 VAC, -40 to 85°C operating temperature
NPort S9450I-2M-ST-WV-T 4-port RS-232/422/485 rugged device server,
3 10/100M Ethernet ports,
2 100M multi-mode fiber ports with ST connectors,
24/48 VDC, -40 to 85°C operating temperature
NPort S9450I-2M-ST-HV-T 4-port RS-232/422/485 rugged device server,
3 10/100M Ethernet ports,
2 100M multi-mode fiber ports with ST connectors,
88-300 VDC or 85-264 VAC, -40 to 85°C operating temperature
NPort S9450I-2S-SC-WV-T 4-port RS-232/422/485 rugged device server,
3 10/100M Ethernet ports,
2 100M single-mode fiber ports with SC connectors,
24/48 VDC, -40 to 85°C operating temperature
NPort S9450I-2S-SC-HV-T 4-port RS-232/422/485 rugged device server,
3 10/100M Ethernet ports,
2 100M single-mode fiber ports with SC connectors,
88-300 VDC or 85-264 VAC, -40 to 85°C operating temperature
NPort S9450I-2S-ST-WV-T 4-port RS-232/422/485 rugged device server,
3 10/100M Ethernet ports,
2 100M single-mode fiber ports with ST connectors,
24/48 VDC, -40 to 85°C operating temperature
NPort S9450I-2S-ST-HV-T 4-port RS-232/422/485 rugged device server,
3 10/100M Ethernet ports,
2 100M single-mode fiber ports with ST connectors,
88-300 VDC or 85-264 VAC, -40 to 85°C operating temperature



Kunden, die diesen Artikel gesehen haben, sahen auch
Alle Cookies akzeptieren Ablehnen Konfigurieren

Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr erfahren.