MOXA IA261-I / IA262-I

Die Embedded IA261-I/262-I-Computer bieten zwei (IA262-I) oder vier (IA261) serielle RS-232/422/485-Ports, zwei CANbus-Ports (nur IA262-I), zwei Ethernet-Ports, acht digitale Eingangskanäle, acht digitale Ausgangskanäle, VGA-Ausgang, zwei USB-Server und einen CompactFlash-Sockel. Die Computer sind in einem kompakten, IP40-geschützten industriellen Aluminiumgehäuse untergebracht.

Die IA261-I/262-I-Computer verwenden die Cirrus Logic EP9315 ARM9 RISC-CPU mit 32 Bit, 200 MHz. Diese leistungsfähige Datenverarbeitungs-Engine unterstützt mehrere nützliche Kommunikationsfunktionen, erzeugt jedoch nicht viel Abwärme. Das integrierte 32 MB NOR Flash-ROM und 128 MB SDRAM bieten Ihnen ausreichend Arbeitsspeicher zur direkten Ausführung Ihrer Anwendungssoftware auf dem IA261-I/262-I.

Mit der integrierten VGA-Ausgabeschnittstelle eignet sich der IA261-I/262-I zur Verwendung mit SCADA-Systemen in industriellen Anwendungen, wie z. B. in der Fertigungsautomatisierung, in der Überwachung von Produktionslinienverfahren und in der Bergbauautomatisierung, die VGA- und HMI-Funktionen benötigen.

Die IA261-I/262-I-Computers unterstützen RS-232/422/485, CANbus, digitale I/O, 2 KV-Isolationsschutz und bieten zwei LAN-Ports. Somit sind diese Geräte ideal als Kommunikationsplattformen für industrielle Anwendungen geeignet, die Netzwerkredundanz erfordern. Neben den Standardmodellen stehen auch Modelle mit einem erweiterten Temperaturbereich (-40 bis 75 °C) zur Verfügung, sodass diese auch in rauen industriellen Umgebungen eingesetzt werden können.

Die Embedded IA260-Computer werden mit vorinstalliertem Standard-Linux oder mit dem gängigen WinCE OS ausgeliefert. Die für einen Desktop-PC entwickelte Software kann mit einem gängigen Compiler ganz einfach auf die IA260-Plattform portiert werden, ohne den Code zu verändern. Sie können die für eigene Anwendungen entwickelte Software im Flash-Speicher des IA260 ablegen.

Hardware Specifications

Computer

CPU
Cirrus EP9315 ARM9 CPU, 200 MHz

OS (pre-installed)
Windows CE 6.0 or Linux

DRAM
128 MB onboard

Flash
32 MB onboard

USB
USB hosts x 2, compliant with USB 2.0 (OHCI) type A connectors


Storage

Storage Expansion
CompactFlash slot


Display

Graphics Controller
EP9315 internal graphics accelerator engine with TTL graphical signal support

Display Memory
Dynamic video memory (shares system memory)

Display Interface
CRT interface for VGA output, DB15 female connector

Resolution
1024 x 768, 8 bits


Ethernet Interface

LAN
2 auto-sensing 10/100 Mbps ports (RJ45)

Magnetic Isolation Protection
1.5 kV built-in


Serial Interface

Serial Standards
2 or 4 RS-232/422/485 ports, software-selectable (DB9 male)

ESD Protection
4 kV for all signals

Isolation
2 kV digital isolation

Console Port
RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1)


Serial Communication Parameters

Data Bits
5, 6, 7, 8

Stop Bits
1, 1.5, 2

Parity
None, Even, Odd, Space, Mark

Flow Control
RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485

Baudrate
50 bps to 921.6 kbps (supports non-standard baudrates; see user´s manual for details)


Serial Signals

RS-232
TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND

RS-422
TxD+, TxD-, RxD+, RxD-, GND

RS-485-4w
TxD+, TxD-, RxD+, RxD-, GND

RS-485-2w
Data+, Data-, GND


Digital Input

Input Channels
8, source type

Input Voltage
0 to 30 VDC

Digital Input Levels for Dry Contacts

• Logic level 0: Close to GND
  
• Logic level 1: Open

Digital Input Levels for Wet Contacts

• Logic level 0: +3 V max.
  
• Logic level 1: +10 V to +30 V (COM to DI)

Connector Type
10-pin screw terminal block (8 points, COM, GND)

Isolation
3 kV optical isolation


Digital Output

Output Channels
8, sink type

Output Current
Max. 200 mA per channel

On-state Voltage
24 VDC nominal, open collector to 30 V

Connector Type
9-pin screw terminal block (8 points, GND)

Isolation
3 kV optical isolation


CANbus Communication (IA262 models only)

Interface
Dual optically isolated CAN2.0A/2.0B compliant ports

CAN Controller
Phillips SJA1000T

Signals
CAN-H, CAN-L

Isolation
2 kV digital isolation

Speed
10 kbps to 1 Mbps

Connector Type
DB9 male


LEDs

System
Power, Ready, Storage

LAN
10M/Link x 2, 100M/Link x 2 (on connector)

Serial
TxD x 4, RxD x 4
IA261-I: P1 to P4 for serial ports
IA262-I: P1 to P2 for serial ports, P3 to P4 for CAN ports


Switches and Buttons

Reset Button
Supports "Reset to Factory Default"


Physical Characteristics

Housing
Aluminum, industrial vertical form factor

Weight
950 g

Dimensions
60 x 115 x 152 mm (2.36 x 4.53 x 5.98 in)

Mounting
DIN rail, wall


Environmental Limits

Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature
Standard Models: -20 to 80°C (-4 to 176°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)

Ambient Relative Humidity
5 to 95% (non-condensing)

Anti-vibration
5 g rms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr per axis

Anti-shock
50 g @ IEC-68-2-27, half sine wave, 11 ms


Power Requirements

Input Voltage
Redundant power input design
PWR1: 12 to 48 VDC (3-pin terminal block)
PWR2: 12 to 48 VDC (power jack with thread)

Power Consumption With no load on USB ports: 5.8 W

240 mA @ 24 VDC

• 480 mA @ 12 VDC

With full load on USB ports: 11 W

450 mA @ 24 VDC

• 900 mA @ 12 VDC

Standards and Certifications

Safety
UL 60950-1, CSA C22.2 No. 60950-1-03, EN 60950-1

EMC
EN 61000-6-4, EN 61000-3-2 Class D, EN 61000-3-3, EN 61000-6-2, FCC Part 15 Subpart B Class A

Green Product
RoHS, CRoHS, WEEE


Reliability

Alert Tools
Built-in buzzer and RTC (real-time clock)

Automatic Reboot Trigger
Built-in WDT (watchdog timer)

MTBF (mean time between failures)
IA261-I: 118,752 hrs
IA261-I: 131,832 hrs


Note

These hardware specifications describe the embedded computer unit itself, but not its official accessories. In particular, the wide temperature specification does not apply to accessories such as power adapters and cables.

Software Specifications Linux

OS
Linux 2.6.23

File System
JFFS2, NFS, Ext2, Ext3

Internet Protocol Suite
TCP, UDP, IPv4, SNMPv1, ICMP, ARP, HTTP, CHAP, PAP, DHCP, NTP, NFS, SMTP, Telnet, FTP, TFTP, PPP, PPPoE

Internet Security
OpenVPN, iptables firewall

Web Server (Apache)
Allows you to create and manage web sites

Terminal Server (SSH)
Provides secure encrypted communications between two un-trusted hosts over an insecure network

Dial-up Networking
PPP Daemon for Linux that allows Unix machines to connect to the Internet through dialup lines, using the PPP protocol, as a PPP server or client. Works with ´chat´, ´dip´, and ´diald´, among (many) others. Supports IP, TCP, UDP, and (for Linux) IPX (Novell).

Watchdog
Features a hardware function to trigger system reset in a user specified time interval (Moxa API provided)

Application Development Software

• Moxa API Library (Watchdog timer, Moxa serial I/O control, Moxa DI/DO API)
  
• GNU C/C++ cross-compiler
  
• GNU C library
  
• GDB source-level debugging server

Software Protection
Encryption tool for user executable files (based on patented Moxa technology)


Windows Embedded CE 6.0

OS
Windows Embedded CE 6.0

File System
FAT (for on-board flash)

Internet Protocol Suite
TCP, UDP, IPv4, SNMPv2, ICMP, IGMP, ARP, HTTP, CHAP, PAP, SSL, DHCP, SNTP, SMTP, Telnet, FTP, PPP

Web Server (WinCE IIS)
Supports ASP, ISAPI Secure Socket Layer (SSL 2/3) and Transport Layer Security (TLS/SSL 3.1) public key-based protocols, and Web Administration ISAPI Extensions

Dial-up Networking
Supports RAS client API and PPP, Extensible Authentication Protocol (EAP), and RAS scripting

File Server
Enables remote clients to access files and other resources over the network

Watchdog Features a hardware function to trigger system reset in a user specified time interval. (Moxa API provided)

Application Development Software

Moxa WinCE 6.0 SDK

• Moxa API Library
  
• C Libraries and Run-times
  
• Component Services (COM and DCOM)
  
• Microsoft® .NET Compact Framework 2.0
  
• XML, including DOM, XQL, XPATH, XSLT, SAX, SAX2
  
• SOAP Toolkit Client
  
• Winsock 2.2

Ordering Information

IA261-I-CE	RISC-based Industrial Ready-to-Run Embedded Computer with 4 Serial Ports, 8 DI Channels, 8 DO Channels, Dual LANs, VGA, CompactFlash, USB, Windows CE 6.0
IA262-I-CE	RISC-based Industrial Ready-to-Run Embedded Computer with 2 Serial Ports, 8 DI Channels, 8 DO Channels, Dual LANs, VGA, CAN, CompactFlash, USB, Windows CE 6.0

Wide Operating Temperature Models (-40 to 75°C)

IA261-I-T-CE	RISC-based Industrial Ready-to-Run Embedded Computer with 4 Serial Ports, 8 DI Channels, 8 DO Channels, Dual LANs, VGA, CompactFlash, USB, Windows CE 6.0, Wide Temperature
IA262-I-T-CE	RISC-based Industrial Ready-to-Run Embedded Computer with 2 Serial Ports, 8 DI Channels, 8 DO Channels, Dual LANs, VGA, CAN, CompactFlash, USB, Windows CE 6.0, Wide Temperature
All item includes	IA261-I or IA262-I computer Wall mounting kit DIN-Rail mounting kit Ethernet cable: RJ45 to RJ45 cross-over cable, 100 cm CBL-RJ45F9-150: 8-pin RJ45 to DB9 female console port cable, 150 cm CBL-RJ45M9-150: 8-pin RJ45 to DB9 male serial port cable, 150 cm Universal Power Adaptor Document and Software CD Quick Installation Guide (printed) Warranty Card