MOXA ioPAC 8600 Series Expansion Modules
I/O Modules for ioPAC 8600 series modular programmable controllers
- 86M-1620D-T: 16 digital inputs, 24 to 110 VDC, channel LED, sink type
- 86M-1832D-T: 8 channel-to-channel isolated DIs, 24 VDC, channel LED, sink/source type
- 86M-2604D-T: 6 relays, channel LED, form A (N.O.) type
- 86M-2830D-T: 8 channel-to-channel isolated DOs, 24 VDC, channel LED, sink-type
- 86M-4420-T: 4 analog outputs, 0 to 10 V or -10 to 10 V or 0 to 20 mA or 4 to 20 mA
- 86M-5212U-T: 2-port 2-wire Ethernet switch
- 86M-5250-T: 2 CAN ports, channel LED
Die Module der Moxa-Serie 86M mit von Kanal zu Kanal isolierten DIs, von Kanal zu Kanal isolierten DOs, Relais und AOs erweitern die E/A-Optionen für die Serie ioPAC 8600.
In Kombination mit 85M-Modulen stehen den Anwendern nun genügend Optionen zur Verfügung, um die optimale E/A-Kombination für ihre Zielanwendung auswählen zu können. Alle 86M-Module sind für Schienenfahrzeug-Anwendungen konzipiert und erfüllen als solche die Normen EN 50121-3-2, EN 50121-4 und EN 50155. Zusätzlich können sie auch in einem erweiterten Betriebstemperaturbereich von -40 bis 75°C arbeiten.
CPU10 Series Specifications
PW10-15W-T Specifications
86M-1832D-T Specifications
86M-2830D-T Specifications
86M-2604D-T Specifications
86M-4420-T Specifications
86M-1620D-T Specifications
86M-5212U-T Specifications
86M-5250-T Specifications
Common Specifications
- Computer
- CPU Type
32-bit ARM9 192 MHz CPU
OS
Linux
Clock
Real-time clock with super capacitor (retains charge for 7 days)
Memory
- SDRAM
64 MB
Flash
32 MB (10 MB reserved for user)
FRAM
128 KB
microSD™ Slot
Up to 32 GB (SD 2.0 compatible)
Note:
For units operating in extreme temperatures, industrial-grade, wide-temperature microSD cards are required.
Switches & Buttons
- Rotary Switch
0 to 9
Button
Reset to factory defaults
Ethernet Interface
- LAN
2 x 10/100 Mbps, Ethernet bypass or 2 MACs (IPs), jumper selectable, RJ45 or M12
Protection
1.5 kV magnetic isolation
Automation Languages
C/C++ or IEC 61131-3
Protocols
Modbus TCP/RTU (master/slave), SNMP, TCP/IP, UDP, DHCP, BOOTP, SNTP, SMTP
Environmental Limits
- Operating Temperature
-40 to 75°C (-40 to 176°F)
Power Requirements
- Input Current
200 mA @ 24 VDC
MTBF (mean time between failures)
- Time
1,032,466 hrs
Standard
Telcordia SR332
PW10-15W-T Specifications
- Power
- Input Voltage
24 to 110 VDC (16.8 to 154 VDC)
Note:
Compliant with EN 50155 at 24/48/60/72/110 VDC
Wattage
15 W
Galvanic Isolation
3k VDC
Dual-Power Input
Yes
Environmental Limits
- Operating Temperature
-40 to 75°C (-40 to 176°F)
MTBF (mean time between failures)
- Time
1,579,517 hrs
Standard
Telcordia SR332
86M-1832D-T Specifications
- Inputs and Outputs
- On: 10 to 30 VDC
- Off: 0 to 3 VDC
- Digital Inputs
8 channels
Isolation
To system: 3k VDC or 2k Vrms
Channel-to-channel: 1k VDC
Digital Input
- Sensor Type
Wet contact (NPN or PNP)
I/O Mode
DI, counter, or frequency
Wet Contact (DI+ to DI-)
Counter Frequency
5 kHz
Digital Filtering Time Interval
Software selectable (by 0.1 ms)
Physical Characteristics
- Wiring
I/O cable, 16 AWG (max.)
Connector
Spring-type terminal block
Environmental Limits
- Operating Temperature
-40 to 75°C (-40 to 176°F)
Power Requirements
- Input Current
12.6 mA @ 24 VDC
MTBF (mean time between failures)
- Time
1,149,108 hrs
Standard
Telcordia SR332
86M-2830D-T Specifications
- Inputs and Outputs
- Digital Outputs
8 channels
Isolation
To system: 3k VDC or 2k Vrms
Channel-to-channel: 1k VDC
Digital Output
- Type
Sink
I/O Mode
DO or PWM
Pulse Output Frequency
1 kHz
Short Circuit Protection
750 mA @ 25°C
Over-Voltage Protection
41 VDC
Over-Current Protection
2.6 A (4 channels @ 650 mA)
Over-Temperature Shutdown
175°C (typical), 150°C (min.)
Current Rating
200 mA per channel
Physical Characteristics
- Wiring
I/O cable, 16 AWG (max.)
Connector
Spring-type terminal block
Environmental Limits
- Operating Temperature
-40 to 75°C (-40 to 176°F)
Power Requirements
- Input Current
76.7 mA @ 24 VDC
MTBF (mean time between failures)
- Time
1,766,037 hrs
Standard Telcordia SR332
86M-2604D-T Specifications
- Inputs and Outputs
- Relays
6 channels
Isolation
To System: 3k VDC or 2k Vrms
Relay
- Type
Form A (N.O.)
I/O mode
DO or PWM
Pulse Output Frequency
0.33 Hz
Contact Current Rating
Resistive Load: 5 A @ 30 VDC, 250 VAC
Relay On/Off Time
10 ms (max.)
Initial Insulation Resistance
1000 mega-ohms (min.) @ 500 VDC
Mechanical Endurance
5,000,000 operations
Electrical Endurance
60,000 operations @ 5 A resistive load
Contact Resistance
100 milli-ohms (max.)
Physical Characteristics
- Wiring
I/O cable, 16 AWG (max.)
Connector
Spring-type terminal block
Environmental Limits
- Operating Temperature
-40 to 75°C (-40 to 176°F)
Power Requirements
- Input Current
127 mA @ 24 VDC
MTBF (mean time between failures)
- Time
4,173,843 hrs
Standard Telcordia SR332
86M-4420-T Specifications
- Inputs and Outputs
- Analog Outputs
4 channels
Isolation
To system: 3k VDC or 2k Vrms
Analog Output
- Resolution
12 bits
Output range
0 to 10 V, -10 to 10 V, 0 to 20 mA, 4 to 20 mA
I/O mode
Static or Waveform mode
Voltage Output
10 mA (max.)
Accuracy
±0.1% FSR @ 25°C
±0.3% FSR @ -40 and 75°C
Current Load Resistance
Internal Power: 400 ohms
External 24 VDC Power: 1000 ohms
Update Rate
Software polling or waveform mode
Waveform Type
Sine, Triangle, Square
Wavemode Frequency
125 Hz
Physical Characteristics
- Wiring
I/O cable, 16 AWG (max.)
Connector
Spring-type terminal block
Environmental Limits
- Operating Temperature
-40 to 75°C (-40 to 176°F)
Power Requirements
- Input Current
94.2 mA @ 24 VDC (voltage)
143.8 mA @ 24 VDC (current)
MTBF (mean time between failures)
- Time
2,409,345 hrs
Standard Telcordia SR332
86M-1620D-T Specifications
- Inputs and Outputs
- On: channel voltage > 0.3 x (external power voltage)
- Off: channel voltage < 0.15 x (external power voltage)
- Digital Inputs
16 channels
Isolation
To system:
3k VDC or 2k Vrms
Digital Input
- Type
PNP
I/O mode
DI
Logic Definition
Scan Period
8 ms (typ.)
Scan on Time
0.5 ms
Debouncing Function
Software disable/enable
Debouncing Time
1 to 15 ms (software-selectable)
Common Type
8 points per COM
Physical Characteristics
- Wiring
I/O cable, 16 AWG (max.)
Connector
Spring-type terminal block
Channel LED
Yes
Environmental Limits
- Operating Temperature
-40 to 75°C (-40 to 176°F)
Power Requirements
- Input Current
12.6 mA @ 24 VDC
MTBF (mean time between failures)
- Time
1,115,244 hrs
Standard Telcordia SR332
86M-5212U-T Specifications
- Ethernet Communication
- Interface
Two 2-wire Ethernet ports
Isolation
To system: 3k VDC or 2k Vrms
Standards
- Supported Standards
100BASE-TX IEEE 802.3u
10BASE-T IEEE 802.3
100 Mbps BroadR-Reach®
10 Mbps BroadR-Reach®
Physical Characteristics
- Wiring
CAT 5 standard cable with M12 D-code male connection
Connector
M12 (D-code, female) x 2
Channel LED
Yes
Environmental Limits
- Operating Temperature
-40 to 75°C (-40 to 176°F)
Power Requirements
- Input Current
578 mA @ 3.3 VDC
MTBF (mean time between failures)
- Time
2,498,942 hrs
Standard Telcordia SR332
86M-5250-T Specifications
- Serial Communication
- Interface
2 CAN ports
Isolation
To system: 3k VDC or 2k Vrms
CAN Bus Communication
- Protocols
CAN 2.0A
CAN 2.0B
CANopen DS301, V4.02
CANopen DS401
Speed
10/20/50/125/250/500/800 kbps, 1 Mbps
Termination Resistor
N/A, 120 ohms (by DIP)
Physical Characteristics
- Connector
DB9 male
Channel LED
Yes
Environmental Limits
- Operating Temperature
-40 to 75°C (-40 to 176°F)
Power Requirements
- Input Current
60 mA @ 24 VDC
MTBF (mean time between failures)
- Time
3,306,609 hrs
Standard Telcordia SR332
Common Specifications
- Power Requirements
- Input Voltage
24 to 110 VDC (16.8 to 154 VDC)
Environmental Limits
- Operating Temperature
-40 to 75°C (-40 to 176°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Shock
IEC 60068-2-27
Vibration
IEC 60068-2-6
Standards and Certifications
- Safety
UL 508
EMC
EN 55022/24
EMI
FCC Part 15 Subpart B Class A, CISPR 22
EMS
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS:
80 MHz to 1000 MHz: 3 V/m
1400 MHz to 2100 MHz: 3 V/m
2100 MHz to 2700 MHz: 1 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
IEC 61000-4-5 Surge: Power: 2 kV (L-PE), 1 kV (L-L);
Rail Traffic EN 50155 (essential compliance*), EN 50121-3-2, EN 50121-4
*Moxa defines “essential compliance” to include those EN 50155 requirements that make products more suitable for rolling stock railway applications.
Ordering Information | |
Available Models | |
86M-1620D-T | 16 DIs, sink, 24 to 110 VDC, channel LED, -40 to 75°C operating temperature |
86M-1832D-T | 8 DIs, sink/source, 24 VDC, ch-to-ch isolation, channel LED, -40 to 75°C operating temperature |
86M-2604D-T | 6 relays, form A (N.O.), channel LED, -40 to 75°C operating temperature |
86M-2830D-T | 8 DOs, sink, 24 VDC, ch-to-ch isolation, channel LED, -40 to 75°C operating temperature |
86M-4420-T | 4 AOs, 0 to 10 V, -10 to 10 V, 0 to 20 mA, or 4 to 20 mA, -40 to 75°C operating temperature |
86M-5212U-T | 2-port 2-wire Ethernet switch, -40 to 75°C operating temperature |
86M-5250-T | 2 CAN ports, -40 to 75°C operating temperature |
Kunden, die diesen Artikel gesehen haben, sahen auch