MOXA ioLogik E2262
Smart Ethernet remote I/O with Click&Go, 8 TCs, and 4 DOs
- Active communication with patented MX-AOPC UA Server and Active OPC server
- Smart alarm management with email, SNMP traps, TCP, UDP
- Save time and wiring costs with peer-to-peer communication
- Front-end intelligence with patented Click&Go control logic, up to 24 rules
- Simplify I/O management with MXIO library for Windows or Linux
- Web browser configurations over HTTP
- Supports SNMP v1/2c/3
- Wide operating temperature range of -40 to 75°C (-40 to 167°F)
Die ioLogik E2262 kann die Länge von Sensorleitungen maximal um den Faktor 10 erweitern. Ein Beispiel: Während die Verkabelung für einen J-Typ in der Regel nur 10 m lang sein darf, können Sie die TC-Verkabelung des J-Typs mit dem ioLogik E2262 auf bis zu 100 m ausdehnen.
Genauere Temperaturwerte
Die ioLogik E2262 verfügt über zwei CJC-Klemmen zur Kaltstellenkompensation und unterstützt digitale Filterung. Kalibrierung, Linearisierung und Berechnung basieren auf den vom NIST (National Institute of Standards and Technology) verfolgten Geräten und werden im Speicher abgelegt, um diese Fehlerquelle zu eliminieren. Der ioLogik E2262 kann auch ein Ausbrennen und Unterbrechungen erkennen.
Genauere Temperaturwerte
Die ioLogik E2262 verfügt über zwei CJC-Klemmen zur Kaltstellenkompensation und unterstützt digitale Filterung. Kalibrierung, Linearisierung und Berechnung basieren auf den vom NIST (National Institute of Standards and Technology) verfolgten Geräten und werden im Speicher abgelegt, um diese Fehlerquelle zu eliminieren. Der ioLogik E2262 kann auch ein Ausbrennen und Unterbrechungen erkennen.
Moxa’s ioLogik E2200 is a new type of Ethernet micro RTU controller, which is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices. Unlike traditional RTUs, which are passive and must poll for data, Moxa’s ioLogik E2200 series with Active OPC Server makes seamless connection with SCADA systems a reality. In addition, SNMP is used for communicating with an NMS (Network Management System) for IT field users. The I/O status of an Ethernet micro RTU controller can be reported and controlled automatically on-site based on user specified conditions. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.
Actice Alarming with Local Intelligence
The ioLogik E2200 Micro RTU supports simple and powerful Click&Go™ technology to deliver event-driven reports and allow alarm messages to be sent by email, TCP/UDP, and SMNP Trap with real-time stamps. With built-in Click&Go™ intelligence, the ioLogik E2200 micro RTU can be used for simple output control when it is triggered by input status, without the need for a PC controller. The ioLogik E2200 micro RTU reports I/O status automatically based on user-specified conditions. This report by-exception approach requires far less bandwidth than the traditional polling approach.
ioLogik E2262 Specifications
Inputs and Outputs
Thermocouple Inputs
8 channels
Digital Outputs
4 channels
Thermocouple Input
Sensor Type
J (0 to 750°C), K (-200 to 1250°C), T (-200 to 350°C), E (-200 to 900°C), R (-50 to 1600°C), S (-50 to 1760°C), B (600 to 1700°C), N (-200 to 1300°C)
Millivolt Type
Sampling Rate
12 samples/sec (all channels)
Resolution
16 bits
Accuracy
±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
±0.5% FSR @ -40 and 75°C
Input Impedance
1 M ohms
Digital Output
Type
Sink
I/O Mode
DO or Pulse Output
Pulse Output Frequency
100 Hz
Over-voltage Protection
45 VDC
Over-current Protection
2.6 A (4 channels @ 650 mA)
Over-temperature Shutdown
175°C
Current Rating
200 mA per channel
Isolation
3k VDC or 2k Vrms
Power Requirements
Power Consumption
160 mA @ 24 VDC
MTBF (mean time between failures)
Time
341,063 hrs
Database
Telcordia (Bellcore)
Common Specifications
LAN
Ethernet
1 10/100 Mbps RJ45 port
Protection
1.5 kV magnetic isolation
Protocols
Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, CGI, SNTP, SMTP
Serial Communication
Interface
RS-485-2w: Data+, Data-, GND (3-contact terminal block)
Serial Line Protection
15 kV ESD for all signals
Serial Communication Parameters
Parity
None
Data Bits
8
Stop Bits
1
Flow Control
None
Baudrate
1200 to 115200 bps
Protocol
Modbus/RTU
Power Requirements
Power Input
24 VDC nominal, 12 to 36 VDC
Physical Characteristics
Wiring
I/O cable max. 14 AWG
Dimensions
115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
Weight
under 250 g
Mounting
DIN rail or wall
Environmental Limits
Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Altitude
Up to 2000 m
Note Please contact us if you require products guaranteed to function properly at higher altitudes.
Standards and Certifications
Safety
UL 508
EMI
EN 61000-3-2; EN 61000-3-3; EN 61000-6-4;
FCC
Part 15, Subpart B, Class A
EMS
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5,
EN 61000-4-6, EN 61000-4-8, EN 61000-4-11, EN 61000-6-2
Shock
IEC 60068-2-27
Freefall
IEC 60068-2-32
Vibration
IEC 60068-2-6
Green Product
RoHS, CRoHS, WEEE
Ordering Information
Actice Alarming with Local Intelligence
The ioLogik E2200 Micro RTU supports simple and powerful Click&Go™ technology to deliver event-driven reports and allow alarm messages to be sent by email, TCP/UDP, and SMNP Trap with real-time stamps. With built-in Click&Go™ intelligence, the ioLogik E2200 micro RTU can be used for simple output control when it is triggered by input status, without the need for a PC controller. The ioLogik E2200 micro RTU reports I/O status automatically based on user-specified conditions. This report by-exception approach requires far less bandwidth than the traditional polling approach.
ioLogik E2262 Specifications
Inputs and Outputs
Thermocouple Inputs
8 channels
Digital Outputs
4 channels
Thermocouple Input
Sensor Type
J (0 to 750°C), K (-200 to 1250°C), T (-200 to 350°C), E (-200 to 900°C), R (-50 to 1600°C), S (-50 to 1760°C), B (600 to 1700°C), N (-200 to 1300°C)
Millivolt Type
- Mode: ±78.126 mV, ±39.062 mV, ±19.532 mV
- Fault and over-voltage protection: -35 to +35 VDC (power off);
-25 to +30 VDC (power on)
Sampling Rate
12 samples/sec (all channels)
Resolution
16 bits
Accuracy
±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C
±0.5% FSR @ -40 and 75°C
Input Impedance
1 M ohms
Digital Output
Type
Sink
I/O Mode
DO or Pulse Output
Pulse Output Frequency
100 Hz
Over-voltage Protection
45 VDC
Over-current Protection
2.6 A (4 channels @ 650 mA)
Over-temperature Shutdown
175°C
Current Rating
200 mA per channel
Isolation
3k VDC or 2k Vrms
Power Requirements
Power Consumption
160 mA @ 24 VDC
MTBF (mean time between failures)
Time
341,063 hrs
Database
Telcordia (Bellcore)
Common Specifications
LAN
Ethernet
1 10/100 Mbps RJ45 port
Protection
1.5 kV magnetic isolation
Protocols
Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, CGI, SNTP, SMTP
Serial Communication
Interface
RS-485-2w: Data+, Data-, GND (3-contact terminal block)
Serial Line Protection
15 kV ESD for all signals
Serial Communication Parameters
Parity
None
Data Bits
8
Stop Bits
1
Flow Control
None
Baudrate
1200 to 115200 bps
Protocol
Modbus/RTU
Power Requirements
Power Input
24 VDC nominal, 12 to 36 VDC
Physical Characteristics
Wiring
I/O cable max. 14 AWG
Dimensions
115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
Weight
under 250 g
Mounting
DIN rail or wall
Environmental Limits
Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Altitude
Up to 2000 m
Note Please contact us if you require products guaranteed to function properly at higher altitudes.
Standards and Certifications
Safety
UL 508
EMI
EN 61000-3-2; EN 61000-3-3; EN 61000-6-4;
FCC
Part 15, Subpart B, Class A
EMS
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5,
EN 61000-4-6, EN 61000-4-8, EN 61000-4-11, EN 61000-6-2
Shock
IEC 60068-2-27
Freefall
IEC 60068-2-32
Vibration
IEC 60068-2-6
Green Product
RoHS, CRoHS, WEEE
Ordering Information
Available Modules | |
ioLogik E2262 | Ethernet Micro RTU Controller with 8 thermocouple inputs and 4 digital outputs |
ioLogik E2262-T | Ethernet Micro RTU Controller with 8 thermocouple inputs and 4 digital outputs, -40 to 85°C operating temperature |
Kunden, die diesen Artikel gesehen haben, sahen auch