TERZ NITE-RS Fast Ethernet Serie
Unmanaged Industrial Ethernet Switch
RJ45 Fast Ethernet
- Flexible use with 24 VAC/VDC
- IP30 metal housing
- Minimal installation width 22.5 mm
- Inrush current limitation
- Temperature range -40 to +70°C
- Stable mounting on 35 mm DIN rail
- Polarity protection
- PROFINET suitable
With an installation width of just 22.5 mm, the NITE-RS switches impress with their extremely slim and high-quality metal housing. The narrow Industrial Ethernet switches for DIN rail mounting operate extremely energy efficient and reliable. The Plug&Play switches convince with their quick and easy commissioning and enable a cost-effective extension of existing or new network installations. Due to the wide temperature range of -40°C to +70°C, a 24 VAC/VDC power supply with polarity protection and inrush current limitation, the switches can be used in every application. Two frame for warding variants (LLDP/PTCP) support all applications perfectly and the compatibility for PROFINET networks is given.
General
- Switch:
IEEE802.3 Store and Forward; non-blocking wire speed
Auto-Negotiation, Auto-MDI-X, Auto-Polarity:
Yes
Frame size:
2,048 Bytes
MAC table size:
2,000 addresses
Quality of Service:
Yes – 4 priority queues
Energy Efficient Ethernet:
No
Flow Control:
No
PROFINET suitable:
Yes
Port count (M12) | 5 | 8 | 16 |
MTBF (SN 29500, Mio. h) |
2.783 | 2.088 | tbd |
Frame Forwarding (Art.-No.) | xxxxx0 | xxxxx1 |
LLDP, PTCP Delay 01:80:C2:00:00:0E | Forwarding | Blocking |
RSTP BPDU 01:80:C2:00:00:00 | Forwarding | Forwarding |
Power supply / electronics
- Nominal voltage:
Vin 24 VAC / 24 VDC
Permitted voltage range:
8 to 28 VAC / 9 to 36 VDC
Connection type:
3-pole pluggable, screw connector (+ - FE)
Wire cross-section:
0.08 to 2.5 mm (AWG 28 to 13)
Supply circuit:
SELV DIN 60950 (circuit breaker 10 A)
Inrush current limiter:
Yes
Input fuse:
Yes, Interrupting rating 50 A @ 125 VAC / VDC
Polarity protection:
Yes
Power failure bridging:
10 ms DIN 50155
PCB Conformal Coating:
No
Protection category:
III
Isolation:
2.25 kVDC; Vin ↔ Ethernet Ports | Vin ↔ housing
Port count (RJ45) | 5 | 8 | 16 |
Power consumption (W) Idle | full load |
0.4 | 0.9 | 0.4 | 1.15 | 1,9 | 2,4 |
Input current (mA) Idle | full load |
16 | 36 | 16 | 48 | 80 | 100 |
Inrush current (A) | 8 | 8 | 16 |
Mechanical properties
- Housing material:
Anodised aluminium, stainless steel
Mounting:
35 mm DIN rail
IP Protection class (operation):
IP30
Port count (RJ45) | 5 | 8 | 16 |
Width (mm) | 22.5 | 22.5 | 38 |
Height (mm) | 103 | 145 | 145 |
Depth (mm) | 77,4 | 77,4 | 77,4 |
Weight (g) | 225 | 295 | 420 |
Ethernet Interfaces
- IEEE Standards:
802.3 10BaseT, 802.3u 100BaseT(X)
Isolation:
2.25 kVDC; Ethernet Port ↔ housing | Port ↔ Port
Connection type:
RJ45
Port Count | Speed:
5,8 Ports | 10/100 Mbit/s
Cable length:
100 m (Twisted Pair, 0.14 mm² - 0.22 mm², Cat 5)
EMC and environmental specifications
- Operating temperature:
-40°C to +70°C
Storage temperature:
-40°C to +85°C
Relative humidity (operation):
0%-95% (not condensing)
Relative humidity (storage):
0%-95% (not condensing)
Atmospheric pressure (operation):
2,000 m (795 hPa)
EMC immunity:
DIN EN - 50121-3-2, 61000-6-2, 55024
EMC radiated emission:
DIN EN - 50121-3-2, 61000-6-4, 55032
Mechanical stability:
DIN EN 61373
Fire protection:
DIN EN 45545
Approvals and certifications
- CE, DIN EN 60950-1
Status and diagnostic indicators
- LED:
Power | Link/Activity per Port
ORDERING INFORMATION
Available Modules | ||
Article | Art.-No. | Specification |
NITE-RS5-1100 | 211400 | 5xRJ45, FE, 24 V |
NITE-RS8-1100 | 211600 | 8xRJ45, FE, 24 V |
NITE-RS16-1100 | 211800 | 16xRJ45, FE, 24 V |
NITE-RS5-1101 | 211401 | 5xRJ45, FE, 24 V, LLDP Blocking |
NITE-RS8-1101 | 211601 | 8xRJ45, FE, 24 V, LLDP Blocking |
NITE-RS16-1101 | 211801 | 16xRJ45, FE, 24 V, LLDP Blocking |
Customers who viewed this item also viewed